Earthwork Volume Calculator
Calculate earthwork cut or fill volume using the Average End Area method. Estimates truck loads and cost for excavation or fill operations.
Inputs
ft²
ft²
ft
Results
Volume
925.9 yd³
Truck Loads (15 yd³)
78
Volume25,000 ft³
Adjusted Volume (Swell)1,157.4 yd³
Estimated Cost$5,787
How to Use This Calculator
- Enter cross-section areas at each station end and the segment length between them.
- Set number of segments and select cut (excavation) or fill (embankment).
- Review total volume in cubic yards using the average end area method.
- Apply a swell or shrinkage factor to convert between bank, loose, and compacted measure.
Ad Placeholder
Related Calculators
Compaction Test Calculator
Calculate wet density, dry density, void ratio, and degree of saturation from Proctor compaction test data.
Retaining Wall Design Calculator
Calculate active earth pressure, overturning moment, and sliding forces on a retaining wall using Rankine's theory.
Pavement Thickness Calculator
Design flexible pavement thickness using a simplified AASHTO 1993 method. Calculates required structural number and layer thicknesses for asphalt, base, and subbase.
Ad Placeholder