Glass Cutting Calculator
Cut list optimization from sheet glass and required pieces.
Inputs
Results
Max deflection (mm)
5.54
Deflection limit L/60 (mm)16.67
Passes deflection check1
Max bending stress (MPa)13.47
Allowable stress (MPa)20
Safety factor1.48
Panel area (m²)1.5
Panel weight (kg)22.5
How to Use This Calculator
- Enter the panel Short Side and Long Side in mm and the Glass Thickness in mm.
- Enter the Design Wind Pressure in Pascals and select the Glass Type (annealed, heat-strengthened, or tempered).
- Select the Support Condition (simply supported or clamped on all four sides).
- Review Maximum Deflection and whether it passes the L/60 deflection limit.
- Check Maximum Bending Stress vs Allowable Stress and Safety Factor to confirm structural adequacy.
Ad Placeholder
Ad Placeholder