Springback Calculator
Calculate springback angle and required over-bend compensation from material properties and bend geometry.
Inputs
°
mm
mm
MPa
MPa
Results
Required Over-Bend Angle
90.45°
Springback Angle0.45°
Springback0.5%
Springback Factor0
Compensated Die Radius1.99 mm
RecommendationLow springback — standard tooling should work
How to Use This Calculator
- Enter the desired final bend angle (degrees).
- Set material thickness and inside bend radius.
- Enter yield strength (MPa) and elastic modulus (GPa) from the material data sheet.
- Review the springback angle (degrees) and the overbend angle to use in the press brake program.
- Test a sample part and measure actual springback -- adjust the overbend angle iteratively for tight tolerances.
Ad Placeholder
Related Calculators
Bend Allowance Calculator
Calculate flat pattern bend allowance and deduction from material thickness, bend angle, inside radius, and K-factor.
K-Factor Calculator
Determine K-factor from material type, thickness, bend radius ratio, and bending method for accurate flat patterns.
Press Brake Tonnage Calculator
Calculate required bending force for a press brake from material thickness, length, die opening, and tensile strength.
Ad Placeholder