Welding Distortion Calculator
Estimate angular distortion, longitudinal shrinkage, transverse shrinkage, and camber from welding based on joint geometry and restraint.
Inputs
in
in
in
Results
Angular Distortion
2.22°
Longitudinal Shrinkage0 in
Transverse Shrinkage0.07 in
Camber (Bowing)0 in
How to Use This Calculator
- Enter Plate Thickness, Weld Size, and Weld Length.
- Set Joint Type and Restraint Level.
- Review the Angular Distortion (°) result.
- Use Longitudinal Shrinkage and Transverse Shrinkage to inform your decision.
- Use the chart to visualize the results and explore different scenarios by adjusting inputs.
Ad Placeholder
Related Calculators
Heat Input Calculator
Calculate welding heat input in kJ/in and kJ/mm along with estimated cooling rate and HAZ width.
Preheat Temperature Calculator
Determine preheat and interpass temperatures based on carbon equivalent (CE) and material thickness using the IIW formula.
PWHT Calculator
Calculate post-weld heat treatment parameters including hold temperature, hold time, heating rate, and cooling rate per ASME guidelines.
Ad Placeholder