Progressive Die Strip Layout Calculator
Calculate strip width, pitch, station design, and material utilization for progressive die stamping.
Inputs
mm
mm
mm
mm
mm
mm
Results
Strip Width
50 mm
Station Pitch53 mm
Total Die Length397.5 mm
Material Utilization56.6%
Waste43.4%
Parts per 1000 ft Coil5,750
Estimated Strokes/min75 SPM
Parts per Hour4,500
Recommended Coil Width50 mm
How to Use This Calculator
- Enter part length (feed direction), part width (across strip), material thickness, and number of stations.
- Set pilot hole diameter and minimum strip edge margin.
- Review step pitch, strip width, parts per strip, and estimated strip length.
- Add one idle station between complex forming stations to allow the strip to stabilize.
- Verify strip width fits your press feed capacity and coil width before finalizing the layout.
Ad Placeholder
Related Calculators
Nesting Efficiency Calculator
Calculate material utilization percentage and parts per sheet from part and sheet dimensions with kerf allowance.
Blank Size Calculator
Calculate flat blank diameter for deep drawn cylindrical parts from part dimensions and flange width.
Press Brake Tonnage Calculator
Calculate required bending force for a press brake from material thickness, length, die opening, and tensile strength.
Ad Placeholder