Contractor Hourly Rate Calculator
Find the hourly rate a trade shop must charge to cover overhead, the owner's pay, a crew's burdened wages and a target net profit, worked from billable hours, with the break-even rate alongside.
About this calculator
An hourly rate for trade work has several jobs to do before any of it is profit. It has to pay the shop's overhead, pay you, and pay each employee's wages along with the taxes, comp and benefits that ride on them. And it has to do all of that from the hours a customer actually pays for, which are fewer than the hours anyone is on the clock. This calculator adds those costs up for a year, divides them by your billable hours, and then lifts the result so the margin you ask for is left over. Take the two-person plumbing shop it opens on: $48,000 of overhead, $75,000 of owner pay and one employee at $30.67 an hour with a 14.1% burden. That is $195,788.50 of costs.
At an illustrative 60% billable share for the owner and 75% for the employee, the shop sells 2,808 hours a year, so it breaks even at $69.73 an hour and needs $77.47 an hour to keep a 10% net margin. Take the employee away and the same overhead rests on only 1,248 billable hours, which is why a one-person shop's rate is far higher. If you are a sole proprietor, tick the box and your pay is treated as what you keep after 2026 self-employment tax (15.3% of 92.35% of net earnings, with the Social Security part stopping at $184,500), grossed up to the earnings that leave it. Half of that tax comes back as an income-tax deduction, which is shown but not subtracted. Profit left in the business also owes self-employment tax, which this model does not add, so a sole proprietor's rate is a little low by the tax on that profit. Overhead, pay, billable shares and margin in the defaults are illustrative; replace them with your own.
Tax Disclaimer
This calculator provides estimates based on general tax rules and may not reflect your specific situation. Tax laws vary by jurisdiction and change frequently. Consult a qualified tax professional or CPA for advice tailored to your circumstances.
Estimates Only
This calculator provides planning estimates based on typical industry figures and the inputs you enter. Actual quantities, rates, and costs vary by project, site, and location. Verify results against current local rates and actual measurements before relying on them for budgets, bids, or compliance.
Inputs
Results
Hourly rate to charge
$77.47
Break-even rate
$69.73
Figures current as of 2026. Sources: IRS Form 1040-ES (2026), Self-Employment Tax and Deduction Worksheet; Topic No. 554, IRS, Self-Employment Tax (Social Security and Medicare Taxes), OPM, Computing Hourly Rates of Pay Using the 2,087-Hour Divisor, BLS, Occupational Employment and Wage Statistics, May 2025 national estimates
How to Use This Calculator
- Enter your paid hours, the pay you want, and the share of your hours you can bill. Tick sole proprietor to gross your pay up for self-employment tax.
- Add employees, their hourly wage, their labor burden percentage and their billable share.
- Enter a year of overhead and the net profit margin you want.
- Read the rate to charge, and the break-even rate that is your floor.
How the result changes with Paid hours a year, per person
| Paid hours a year, per person | Hourly rate to charge | Break-even rate |
|---|---|---|
| 1,040 | $126.14 | $113.53 |
| 1,560 | $93.70 | $84.33 |
| 3,120 | $61.25 | $55.12 |
| 4,000 | $54.11 | $48.70 |
What each input means
- Paid hours a year, per person
- 52 weeks of 40 hours is 2,080. The federal government's long-run average is 2,087.
- Your pay a year, before income tax
- What you want to take home from the business. Illustrative default.
- Your billable share of paid hours
- Estimating, buying material, driving and bookkeeping are not billable. Take this from your own job records.
- I'm a sole proprietor: gross my pay up for self-employment tax
- Treats your pay as what you keep after 2026 self-employment tax and grosses it up.
- Wages from another job already taxed for Social Security this year
- Counts toward the $184,500 Social Security ceiling and lowers the self-employment tax.
- Employees in the field
- Set to 0 for a one-person shop.
- Employee hourly wage
- The default is the BLS national median for plumbers, May 2025.
- Labor burden
- Payroll taxes, workers' comp and benefits as a share of wages. Work yours out with a labor burden calculator.
- Employee billable share of paid hours
- Illustrative default; use your timesheets.
- Overhead a year
- Vehicles, insurance, rent, software, office wages, advertising and tools. Not your pay or field labor.
- Target net profit
- Profit as a share of revenue, left over after every cost above.
What each result means
- Break-even rate
- Below this you lose money, after paying yourself.
- Self-employment tax on your earnings
- Included in the grossed-up pay above. Zero unless you tick sole proprietor.
- Deductible half of that tax
- An income-tax deduction, not a cost here.
How this is calculated
Formula
rate = costs / (billable hours x (1 - target margin)); break-even = costs / billable hoursWorked example, using the default values
- Costs to recoveroverhead + owner pay (grossed up for SE tax if a sole proprietor) + crew wages + crew burden$48,000.00 + $75,000.00 + $63,793.60 + $8,994.90 = $195,788.50
- Billable hourspaid hours x billable share, for you plus each employee1,248 (you) + 1,560 (crew) = 2,808 hours
- Break-even ratecosts / billable hours$195,788.50 / 2,808 = $69.73
- Rate to chargecosts / (billable hours x (1 - target margin))$195,788.50 / (2,808 x 0.9) = $77.47
Figures and sources
- 2026 self-employment tax: 15.3% of 92.35% of net earnings, Social Security part to $184,500 (2026) — IRS Form 1040-ES (2026), Self-Employment Tax and Deduction Worksheet; Topic No. 554
- Self-employment tax overview and deductible half (2026) — IRS, Self-Employment Tax (Social Security and Medicare Taxes)
- 2,080 and 2,087 hour pay divisors (2025) — OPM, Computing Hourly Rates of Pay Using the 2,087-Hour Divisor
- Example wages: plumbers $30.67 an hour, HVAC mechanics $61,010 a year, maintenance and repair workers $49,590 a year (2025) — BLS, Occupational Employment and Wage Statistics, May 2025 national estimates
Engine last updated . Built by Paul Gunder, a software engineer, not a licensed financial, medical, or legal professional.
Frequently Asked Questions
Why use billable hours instead of paid hours?
A paid hour is only billable when a customer pays for it. Holidays, vacation, sick days, driving between jobs, shop time, estimating, buying material and bookkeeping are all paid but sold to nobody. Dividing costs by paid hours would assume every hour is invoiced and push the rate too low. Your billable share is what is left after all of that, and it is best taken from your own timesheets because no published benchmark fits every shop.
What is the difference between the break-even rate and the rate to charge?
Break-even is total costs divided by billable hours: the rate at which revenue exactly covers overhead, your pay and the crew, with nothing left over. The rate to charge divides by billable hours times one minus your target margin, so a 10% margin means ten percent of revenue is profit after every cost. Charging between the two keeps you open but earning less profit than you planned; below break-even you lose money after paying yourself.
How does tick-the-box sole proprietor mode change the answer?
A sole proprietor does not run payroll on their own pay, so the pay target is treated as what is kept after self-employment tax and grossed up to the net earnings that deliver it. The default $75,000 becomes $87,340.87 of earnings with $12,340.87 of tax, lifting the two-person shop's rate from $77.47 to $82.36. Wages from another job already taxed for Social Security reduce the tax because they use up part of the $184,500 ceiling.
Should the 2,087 hour divisor be used instead of 2,080?
For pricing, 2,080 (52 weeks of 40 hours) is the default. The federal government now uses 2,087 because a calendar year runs a day or two past 52 weeks. The difference is under half a percent; if you prefer it, type 2,087 into the paid hours field.
Why doesn't a freelancer rate formula work for a trade shop?
A freelancer formula divides the income you want by the hours you expect to work. That leaves out employees and their burdened cost, assumes every paid hour is sold, gives overhead like vehicles and insurance no line of its own, and leaves no profit on top of your pay. For a shop with a truck and a helper each gap pushes the rate too low.
Related Calculators
The questions that sit next to this one — chosen by subject, including calculators filed under a different category.
Overhead Recovery Rate Calculator
Overhead per billable hour and as a percent of direct job costs.
HR & PayrollLabor Burden Calculator
True hourly cost of an employee with 2026 payroll taxes, comp and benefits.
Small BusinessFreelance Hourly Rate
Back-solve hourly rate from income goal, billable hours, utilization, and overhead.
Construction EstimatingLabor Productivity Calculator
Work hours per unit from crew composition and conditions.
Construction EstimatingUnit Price Estimator Calculator
Cost per unit from labor, material, equipment, and overhead.
More in Construction & Building Trades.