Skip to main content
Calcimator

Flat Rate vs Hourly Calculator

Compare a flat price for a service task with billing it by the hour, and see how many hours the flat price can absorb before it drops below your hourly rate or your break-even rate.

About this calculator

A flat price is a promise about the bill, not about the clock. Quote one and the risk of a slow morning moves from the customer to you, which is fine as long as you know how much slowness the number can take before it stops paying. This calculator answers that in hours rather than opinions. The arithmetic starts by lifting the materials back out. A flat price covers parts as well as time, so what remains after the marked-up material cost is the part actually buying labor, and spreading that over the hours the task usually runs gives what the price pays per labor hour. Two rates measure it: your hourly rate, and beneath it your break-even rate, which covers your costs and leaves nothing over.

Both come out of a contractor hourly rate calculation. On the default task, a $325 flat price for 2.5 hours with $60 of parts marked up 25%, the parts are $75.00 and $250.00 is left for labor, or $100.00 an hour against a $77.47 rate. Billed hourly the same task is $268.68, so the flat price is $56.32 ahead on a day the task behaves. The interesting pair is underneath: the same $250.00 pays exactly $77.47 an hour once the task has taken 3.23 hours, and falls to the $69.73 break-even at 3.59 hours. A trip fee you would only charge under hourly billing moves the comparison but not the per-hour figures. The prices, hours and rates are illustrative.

Inputs

$
$
h
$
%
$
$

Results

What the flat price pays per labor hour

$100.00

Flat price minus the hourly bill

$56.32

Labor checkok
Hourly bill (labor + marked-up materials + trip fee)$268.68
Flat price$325.00
Labor share of the flat price$250.00
Hours at which the flat price pays only your hourly rate3.23
Hours at which the flat price only breaks even3.59

Figures current as of 2025. Source: BLS, Occupational Employment and Wage Statistics, May 2025 national estimates (worked examples only)

How to Use This Calculator
  1. Enter your hourly rate and your break-even rate. A contractor hourly rate calculation gives you both.
  2. Enter the hours the task usually takes, the material cost and your markup, and any trip fee you would charge hourly.
  3. Enter the flat price you plan to quote.
  4. Read what the flat price pays per labor hour and how many hours it can take before it drops to your rate and to break-even.

How the result changes with Flat price for the task

Flat price for the taskWhat the flat price pays per labor hourFlat price minus the hourly bill
$163.00$35.20-$105.68
$244.00$67.60-$24.68
$488.00$165.20$219.32
$813.00$295.20$544.32

What each input means

Your hourly rate
The rate that includes your target profit. A contractor hourly rate calculation produces it.
Your break-even rate
The rate that covers your costs and leaves nothing over.
Hours the task usually takes
Your realistic average for this task, including driving and setup that you would bill.
Material cost
What the parts cost you.
Material markup
Markup on cost, applied to materials on both the flat and hourly side.
Trip fee when billing hourly
Applies to the hourly bill only. It does not change what the flat price pays per labor hour.
Flat price for the task
What you would quote the customer, parts included.

What each result means

What the flat price pays per labor hour
The flat price minus marked-up materials, divided by the hours the task usually takes.
Flat price minus the hourly bill
Positive means the flat price is ahead of hourly billing on a task that takes the usual time.

How this is calculated

Formula

per labor hour = (flat price - materials x (1 + markup)) / hours; hours to your rate = labor share / rate

Worked example, using the default values

  1. Hourly bill
    hours x hourly rate + materials x (1 + markup) + trip fee
    $193.68 + $75.00 + $0.00 = $268.68
  2. Labor share of the flat price
    flat price - marked-up materials
    $325.00 - $75.00 = $250.00
  3. Flat price per labor hour
    labor share / hours the task usually takes
    $250.00 / 2.50 = $100.00
  4. Hours the flat price can absorb
    labor share / your rate, and labor share / your break-even rate
    $250.00 / $77.47 and $250.00 / $69.73 = 3.23 h to your rate, 3.59 h to break-even

Figures and sources

Engine last updated . Built by Paul Gunder, a software engineer, not a licensed financial, medical, or legal professional.

Frequently Asked Questions

How do I know if a flat price leaves enough room for a slow job?

Look at the two hours figures. The first is how long the task can run before the flat price pays only your hourly rate; the second is how long before it only breaks even. If the task regularly surprises you, the break-even hours should sit well above anything you have seen it take. On short jobs a price can look generous per hour and still have almost no slack, because there were never many hours in it.

Why is the material cost taken out before dividing by hours?

A flat price pays for parts and labor together. Dividing the whole price by the hours would credit labor with money that actually covers materials. The calculator removes the marked-up material cost first so the per-hour figure reflects only what is buying your time, which is the number to compare with your hourly rate.

What does the trip fee change?

Only the hourly side of the comparison. A trip fee is something you would charge when billing by the hour, so it raises the hourly bill and narrows the flat price's lead, but it plays no part in what the flat price pays per labor hour or in the hours-to-rate and hours-to-break-even figures.

What if the flat price is below the marked-up materials?

Then there is nothing left to divide. The calculator says the flat price pays nothing for labor, shows a negative or zero labor share, and reports both hours figures as not reached, because no number of hours turns a price that short into your rate.

Where do my hourly rate and break-even rate come from?

From the full cost of running the business: overhead, your own pay, your crew's burdened wages and a target profit, divided by billable hours. The default pair, $77.47 and $69.73, belongs to an illustrative two-person plumbing shop. Replace them with your own rates before relying on the result.

The questions that sit next to this one — chosen by subject, including calculators filed under a different category.

More in Construction & Building Trades.