Job Estimate Builder
Price a job line by line from labor, marked-up materials, a subcontractor and other costs. See the quote total, optional sales tax, what the job costs you, and your gross profit as a margin and a markup.
About this calculator
Every quote you write repeats the same four questions: how many hours, what the materials come to, what the subcontractor wants, and what else the job has to carry. This builder asks them once and prices the job line by line as labor, material, subcontractor and other items. Two figures follow: the price the customer will see, and what it costs you to deliver. Take a panel upgrade. Eight hours of electrician time at $77.47 bills at $619.76. An illustrative $1,150.00 of panel, breakers and wire at a 25% markup bills at $1,437.50. An illustrative $150.00 permit goes on at cost with no markup.
The quote totals $2,207.26. Underneath sits a second set of figures that never prints: those eight hours cost you $34.99 each, the burdened cost per paid hour, so labor costs $279.92 against the $619.76 it bills, and with the materials and permit the job costs $1,579.92. That leaves $627.34 of gross profit, a 28.42% margin on price, which is the same money as a 39.71% markup on cost. Labor is costed per paid hour, not per billable hour, because the hours on a job are paid hours and your hourly rate was built to recover the unbillable ones. Gross margin is not profit: it is measured before a dollar of overhead is paid. Sales tax is optional and entirely your call. Set a rate and tick the categories your state taxes; each line is rounded to the cent first and the tax is rounded once on the sum.
Estimates Only
This calculator provides planning estimates based on typical industry figures and the inputs you enter. Actual quantities, rates, and costs vary by project, site, and location. Verify results against current local rates and actual measurements before relying on them for budgets, bids, or compliance.
Inputs
Results
Quote total the customer pays
$2,207.26
≈ 17 pairs of sneakers
Gross profit (before overhead, before tax)
$627.34
≈ 7 nice dinners out
Figures current as of 2025. Source: University of Minnesota Extension, Setting Your Price: Understanding Gross Margin
How to Use This Calculator
- Enter the labor hours, the rate you charge and your own burdened cost per paid hour.
- Enter the material quantity, unit cost and your markup, then any subcontractor and other costs with their markups.
- Optionally set a sales tax rate and tick the categories your state taxes.
- Read the quote total, then the gross profit as a margin and a markup. Compare the margin with the overhead the job should carry.
How the result changes with Material quantity
| Material quantity | Quote total the customer pays | Gross profit (before overhead, before tax) |
|---|---|---|
| 0.5 | $1,488.51 | $483.59 |
| 0.75 | $1,847.89 | $555.47 |
| 1.5 | $2,926.01 | $771.09 |
| 2.5 | $4,363.51 | $1,058.59 |
What each input means
- Labor hours
- Hours on the job. Paid hours, so they are costed at your cost per paid hour.
- Labor rate charged
- The hourly rate on the quote. A contractor hourly rate calculation produces it.
- Your labor cost per paid hour
- Burdened wage per paid hour. Internal only; never printed on a customer quote.
- Material quantity
- Units of the material, such as 1 panel package or 40 feet of wire.
- Material unit cost
- What you pay per unit. The default is illustrative.
- Material markup
- Markup on cost, not margin on price.
- Subcontractor price
- What a sub charges you for part of the job.
- Other cost: permit, disposal, rental
- Costs passed through to the customer. The default permit is illustrative.
- Other markup
- Often zero for a permit passed through at cost.
- Sales tax rate
- Your own rate. States differ on what is taxable; check with your accountant or revenue department.
How this is calculated
Formula
price = labor + material x (1 + markup) + sub x (1 + markup) + other x (1 + markup) + tax; margin = (price - cost) / priceWorked example, using the default values
- Price each line to the customerlabor = hours x rate; material = quantity x unit cost x (1 + markup); sub and other = cost x (1 + markup)$619.76 + $1,437.50 + $0.00 + $150.00 = Subtotal $2,207.26
- Sales tax on the ticked categoriestax = rate x sum of ticked lines, rounded once0% x $0.00 = $0.00
- Cost to youlabor at your cost per paid hour + materials, sub and other at what you pay$279.92 + $1,150.00 + $0.00 + $150.00 = $1,579.92
- Gross profitsubtotal before tax - cost; margin = profit / subtotal; markup = profit / cost$2,207.26 - $1,579.92 = $627.34 (28.42% margin, 39.71% markup)
Figures and sources
- Gross profit margin is the difference between the value a product is sold for and what it costs, before overhead (2025) — University of Minnesota Extension, Setting Your Price: Understanding Gross Margin
Engine last updated . Built by Paul Gunder, a software engineer, not a licensed financial, medical, or legal professional.
Frequently Asked Questions
Why is labor costed per paid hour and not per billable hour?
Hours on a job are paid hours, so costing them at your burdened cost per paid hour is correct. A cost per billable hour spreads the unbillable time across the billable hours; using it here would count that unbillable time twice, once inside the cost and again inside the hourly rate you charge, which was built to recover it.
What is the difference between margin and markup on this quote?
Both describe the same gross profit. Markup is profit divided by cost; margin is profit divided by price. On the default job, $627.34 of profit is a 39.71% markup on $1,579.92 of cost and a 28.42% margin on a $2,207.26 price. Which one you quote in is a habit, not a fact about the work.
Is gross margin the same as what I keep?
No. Gross profit margin is the difference between what a job is sold for and what it costs to deliver, measured before overhead. The truck, insurance, phone, office hours and advertising all come out of it first, and only what survives them is profit. Hold the margin against your overhead per billable hour or as a percentage of direct costs to see whether the job carries its share.
How does the sales tax option work?
Set a rate and tick the line categories that are taxable where you work. The tax is the rate times the sum of those marked-up lines, rounded once, and it is added to the total but not counted in gross profit or margin. States differ on whether labor on real property is taxable and how contractor purchases are treated, so check with your accountant or revenue department.
Why do subcontractor and other lines take a markup percentage?
Subcontractor and other lines are cost plus a markup: the sub's price or the permit fee is what you pay, and the markup you choose is what you add for managing and carrying it. A permit passed straight through is often left at 0%, while a subcontractor you coordinate and guarantee typically carries a markup.
Related Calculators
The questions that sit next to this one — chosen by subject, including calculators filed under a different category.
Contractor Hourly Rate Calculator
Billable-hour rate for a trade shop with overhead, crew and profit.
HR & PayrollLabor Burden Calculator
True hourly cost of an employee with 2026 payroll taxes, comp and benefits.
Construction EstimatingUnit Price Estimator Calculator
Cost per unit from labor, material, equipment, and overhead.
Construction EstimatingLabor Productivity Calculator
Work hours per unit from crew composition and conditions.
More in Construction & Building Trades.