Mausoleum Capacity Calculator

Crypt count from footprint and configuration.

Building length (ft)

Building width (ft)

Crypt levels high

Corridor width (ft)

Crypt type (0=single, 1=companion)

Tab to move between fields

Total crypts

160

Total interment capacity

160

Crypts per level40

Corridor sections1

Building area (sq ft)1,800

Crypts per 100 sq ft8.9

How to Use This Calculator

Enter building length and width in feet, and number of crypt levels high.
Set corridor width (ft) and select crypt type (single or companion).
Review Total Crypts, Total Interment Capacity, Crypts per Level, and Crypts per 100 sq ft.
Use efficiency per 100 sq ft to compare different building configurations.

How the result changes with Building length (ft)

Building length (ft): Exterior length of the mausoleum building in feet.
Building width (ft): Exterior width of the mausoleum building in feet.
Crypt levels high: Number of crypt tiers stacked vertically (typically 2-6).
Corridor width (ft): Width of interior walkway corridors (5-8 ft typical).
Crypt type (0=single, 1=companion): 0 for single crypts (~33 in wide), 1 for companion/double crypts (~66 in wide).

Total crypts: Total number of crypt spaces in the mausoleum.
Total interment capacity: Total remains capacity (companion crypts hold 2).
Crypts per level: Number of crypt spaces on each tier.
Corridor sections: Number of corridor/wing sections that fit in the building width.
Building area (sq ft): Gross floor area of the mausoleum footprint.
Crypts per 100 sq ft: Density metric: crypts per 100 sq ft of floor area.

Identify Input Parameters
4 parameters
Building length (ft) = 60, Building width (ft) = 30, Crypt levels high = 4, Corridor width (ft) = 6 = 5 input(s) provided
Calculate Total crypts
Total crypts = cryptsPerLevel * cryptLevelsHigh
160 = 160
Calculate Total interment capacity
Total interment capacity = totalCrypts * intermentsPerCrypt
160 = 160
Calculate Crypts per level
Crypts per level = cryptsPerRow * totalCryptRows
40 = 40
Calculate Corridor sections
Corridor sections = max(1, floor(usableWidth / sectionWidth))
1 = 1